[message_box bg_color=”rgb(19, 49, 180)”]

[row v_align=”middle” h_align=”center”]

[col span__sm=”12″]

FREE!! SET OF NEMESIS WET POLISHIN DISCS.

When you purchase this machine we will include a free set of our Nemesis Premium WET Polishing Discs!

[/col]

[/row]

[/message_box]

[row]

[col span=”8″ span__sm=”12″]

Professional angle polisher with high power reserves even at low speeds.

• Variable speed with setting wheel
• Long-life silicone connecting cable
• Temperature-dependent overload protection
• Spindle lock for easy tool change
• Self-shutting carbon brushes and easy brush exchange
• Control valve with a hose
• A splash guard reduces the amount of moisture and dust that enters the motor
  Spindle with double-row ball bearing

GALESKI quality for highest loads: Double ball bearing of the spindle in the rinsing head.

◆ Proven, flexible and transparent splash guard. This means that less moisture and dirt is
sucked into the engine compartment. This significantly increases the service life of the
machine.
◆ Water-cooled Aluminium end shield.
◆ Wear-resistant and unbreakable silicone power cable in signal colour (clearly visible).
◆ Soft start and electronics for constant speed even under load.
◆ Temperature-dependent overload protection.
◆ Spindle lock for easy tool changes.
◆ Speed range designed for stone polishing with infinitely variable speed regulation.
◆ 2 service ports for easy replacements of the carbon brushes.
◆ Bail handle and ergonomic rear handle for safe and comfortable work.
◆ Special requests (e.g. for longer connecting cables or hoses) can be considered.

Application:
Wet polisher for natural or artificial stone processing. Especially suitable for stonemasons,
sculptors, restorers, tilers, renovators, floor renovators, etc.

Technical Data:
Voltage: 110 Volt Spindle thread: M 14
Power: 1,750 Watt Weight: 3.5 kg
Speed: 800 – 3,600 rpm Soft start
Tool Ø max.: 125 mm Overload protection

Included:
Silicone connecting cable 4 m, hose 2.5 m with brass quick coupling, bail handle, CEE-plug, splash guard, carton.

[/col]
[col span=”4″ span__sm=”12″]

[ux_image_box img=”121503″]

Rinsing head spindle bearing

GALESKI Special Quality
for maximum load:
1. Double ball bearing spindle mounting in rinsing head.
2. The water seals were moved up. This results in the bearings being closer to the tool and lower lever forces being applied to the bearing, spindle, and sealing rings.

[/ux_image_box]
[ux_image_box img=”121505″]

With transparent, flexible splash guard.

Advantage: Less moisture and dirt gets into the machine.

[/ux_image_box]

[/col]

[/row]